Want to book by phone? Call us Tel: +86-10-85398521Email: casters@dcfortune.com  
Products Categories
Product Categories
Contact Us

Hot Line:+8613261998885 (24 Hours)
Tel: +86-10-85398521
Fax :+86-10-65430387
E-mail: casters@dcfortune.com
Web: www.dc-casters.com   
www.dcfortunecaster.com
www.dcfortune-caster.com
Skype: dccasters

New Products

PP Scaffolding Wheels

google facebook Twitter Linkedin YouTuBe

News

Home > News > Content

The Use And Maintenance Of Plastic Casters

DC Fortune Group Holdings Limited | Updated: Jul 12, 2017

The use and maintenance of Plastic Casters
We know how to use and repair Plastic Casters do, and now very cattle Plastic Casters to share with you how to use and repair the caster.
Plastic Casters How to use:
1, the wheels must be installed in the factory specified design location.
2, the installation of the wheel bracket must have sufficient strength to meet the load when used.
3, the wheel's function can not be changed, nor the impact of the installation device.
4, moving the axle must always be vertical.
5, between the fixed wheel and its axle in a straight line.
6, if only use rotary Plastic Casters, they must be consistent.
7. If the fixed wheels are used in conjunction with rotating wheels, all wheels must be compatible with each other and must be used by the manufacturer.
Plastic Casters overhaul method:
1, to detect the degree of visual wear of the tread. Tread surface "grinding point" may imply that the accumulation of foreign matter, such as wire rods and other debris may be wound around the wheels, remove the wheels of the bolts and nuts, clean debris. Check the wheel bearings are damaged, if the parts are not damaged can be re-assembled to continue to use, if the wheels are often encountered by the phenomenon of miscellaneous material is recommended to install anti-wrap to avoid.
2, the caster or wheel stuck can also cause "grinding point." Appropriate maintenance inspection, in particular, check the tightening of the bolt, how much oil, replace the damaged wheels can enhance the rolling performance of equipment and rotation flexibility.
3, rubber tires serious damage or become loose may lead to rolling instability, leakage, load abnormalities, and floor damage, etc., timely replacement of damaged tires and bearings can reduce the damage caused by the wheel caused by the cost of downtime.
4, check the repair of the wheel, to determine whether the bolt nut tightened, as much as possible in all the bolts on the use of lock washers or loose nuts. If the bolt is loose, tighten it immediately. If the wheels loosely mounted inside the bracket will cause the wheels to be damaged or not to rotate.
Proper installation of Plastic Casters allows the equipment to be moved and moved objects much easier, but different combinations of Plastic Casters will have different influences on the mobility of the device, and the Plastic Casters will have a few more popular Plastic Casters installation method, providing relevant functional analysis.
Install three Plastic Casters, all for the caster
3 rounds of the combination of installation, suitable for barrel or small equipment handling, good mobility is better than the assembly with the specifications of the four-wheel installation.
Installation of three Plastic Casters, of which one caster, two directional wheels 2 directional wheels and one caster combination for the center of gravity low, medium and light equipment, short-distance handling, good direction control, economy.
Install four Plastic Casters, of which two caster wheels, two directional wheels
2 directional wheel and two caster combination is a conventional assembly method, suitable for heavy-duty equipment, long-distance handling, economical and durable.
Install 4 Plastic Casters, all for the directional wheel
4 directional wheels show a rhombus layout design, suitable for heavy equipment, long distance from the equipment, can not be used for slope of the face.
Installation of four Plastic Casters, of which two directional wheels, two casters
2 directional wheels and 2 caster installation, with two directional wheels placed on both sides, two casters placed at both ends, directional wheels higher than the caster, this assembly is suitable for longer slope pavement.
Install four Plastic Casters, all for the caster
4 caster installation method for heavy equipment, long distance handling, excellent direction, often used for slope of the contact surface.
Installation of six Plastic Casters, of which four caster, two directional wheels
4 rounds and 2 directional wheels are suitable for heavy equipment and homemade countertops for long distance handling, good handling, for a level of contact surface. Shanghai Plastic Casters, Plastic Casters

Home | About Us | Products | News | Exhibition | Contact Us | Feedback | Mobile | XML

Copyright DC Fortune Group Holdings Limited All rights reserved.

DC Fortune Group Holdings Limited